plumbing london

Cooker Extractor Fan Repair

Need help repairing your cooker extractor fan? This article provides DIY troubleshooting and repair tips for common issues. Get it working again!

So, you’re in a pickle. Your beloved cooker extractor fan has decided to call it quits, leaving your kitchen filled with smoke and odors that just won’t budge. We’ve all been there. But fear not, because help is on the way! In this article, we will guide you through the ins and outs of cooker extractor fan repair, providing you with the knowledge and tips you need to bring your trusty appliance back to life. No need to panic, just roll up your sleeves and let’s get fixing!

Common Issues with Cooker Extractor Fans

Cooker extractor fans are essential appliances in any kitchen, as they help remove odors, smoke, and excess heat while cooking. However, like any other electrical appliance, these fans can experience issues from time to time. In this article, we will discuss some of the common problems that may arise with cooker extractor fans and provide DIY troubleshooting and repair tips, when applicable. It’s important to note that if you are not comfortable with performing repairs on your own, it is always best to seek professional assistance.

Motor Failure

One of the most common issues with cooker extractor fans is motor failure. The fan motor is responsible for powering the fan blade and creating the necessary airflow. Over time, the motor can wear out or burn out, causing the fan to stop functioning. If you notice that your fan is not turning on at all, motor failure may be the culprit.

Fan Blade Damage

Another common issue is damage to the fan blades. Fan blades can become bent or broken due to various reasons, such as accidental impact or residue build-up. Damaged fan blades can lead to uneven operation, decreased airflow, or excessive noise.

Electrical Wiring Problems

Electrical wiring problems can also occur in cooker extractor fans. Loose connections, damaged wiring, or faulty switches can disrupt the electrical flow and prevent the fan from working properly. It is important to inspect the wiring and connections carefully if you suspect an electrical issue.

Faulty Controls

The controls of your cooker extractor fan, such as buttons or switches, can also malfunction. If you find that the fan is not responding to your commands or if the controls are unresponsive, there may be an issue with the control panel. Faulty controls can hinder the fan’s functionality and need to be addressed.

Excessive Noise

Excessive noise coming from your cooker extractor fan can be both annoying and concerning. The fan may produce unusual sounds, such as grinding, rattling, or squeaking. These noises can indicate various problems, including loose components, damaged fan blades, or motor issues.

Ineffective Ventilation

The primary function of a cooker extractor fan is to provide effective ventilation by removing airborne pollutants, steam, and cooking odors from your kitchen. If you notice that your fan is no longer performing its job efficiently, it may indicate ventilation issues. Poor ventilation can be caused by clogged vents, improper installation, or other factors.

Sudden Fan Stoppage

If your cooker extractor fan suddenly stops while in use, it can be a cause for concern. Several factors can contribute to sudden fan stoppage, including motor failure, electrical issues, or blown fuses. It is important to look for any obvious signs of malfunction and take appropriate action.

Grease Build-up

Grease build-up is a common issue in cooker extractor fans, especially if they are not regularly cleaned. Over time, grease can accumulate on the fan blades, motor, and filters, restricting airflow and reducing the fan’s effectiveness. Regular maintenance and cleaning are essential to prevent grease build-up.

Vibration Issues

If you notice excessive vibrations coming from your cooker extractor fan, it may indicate a problem with the fan’s mounting or balance. Vibrations can lead to noisy operation or even damage to the fan itself. Addressing the issue promptly is important to prevent further complications.

Unstable Mounting

Proper mounting is crucial for the efficient and safe operation of cooker extractor fans. If the fan is not securely mounted, it can vibrate, produce excessive noise, or even fall off. Unstable mounting can be caused by loose screws, worn-out brackets, or incorrect installation. Ensuring the fan is securely mounted is vital for its long-term functionality.

DIY Troubleshooting and Repair

While some common issues with cooker extractor fans can be resolved through do-it-yourself (DIY) troubleshooting and repair, it’s important to note that certain problems may require professional assistance. If you are not comfortable working with electrical appliances or if the issue is complex, it is strongly recommended to seek the help of a professional. However, for simpler issues, here are some DIY tips to get you started.

Inspecting the Motor

If you suspect motor failure, start by inspecting the fan’s motor. First, ensure that the power supply is turned off to prevent any accidents. Remove the cover of the fan to access the motor. Check for any visible signs of damage, such as burnt wiring or a burnt-out motor. If significant damage is observed, it may be necessary to replace the motor.

Replacing the Motor

If you determine that the motor needs to be replaced, make sure to purchase a compatible replacement motor for your specific cooker extractor fan model. Follow the manufacturer’s guidelines and instructions for removing the old motor and installing the new one. Pay close attention to wiring connections and ensure they are done correctly.

Repairing or Replacing Fan Blades

In case of damaged or broken fan blades, carefully remove the affected blade from the fan assembly. Inspect the other blades for any signs of damage as well. If only one blade is damaged, it may be possible to replace that specific blade. However, if multiple blades are damaged, it is advisable to replace the entire set for optimal performance.

Checking Electrical Connections

If you suspect an electrical issue, start by inspecting the electrical connections of your cooker extractor fan. Ensure that all wires are securely connected and that there are no loose or frayed wires. If you find any damaged wires, it is important to repair or replace them. Tightening any loose connections may also resolve minor electrical problems.

Repairing or Replacing Controls

If the fan’s controls are faulty, you may need to repair or replace the control panel. First, check if the issue is caused by loose connections or dirty switches/buttons. Clean the switches/buttons using an appropriate electrical cleaner. If the controls still do not function correctly, replacing the control panel may be necessary. Make sure to choose a compatible replacement panel.

Reducing Noise Levels

To reduce excessive noise coming from your cooker extractor fan, there are several steps you can take. First, ensure that the fan blades are clean and free from debris or grease build-up. Lubricate any moving parts, such as the motor, according to the manufacturer’s recommendations. Additionally, consider using soundproofing materials, such as foam inserts or acoustic dampers, to minimize noise transmission.

Improving Ventilation Efficiency

If you find that your cooker extractor fan is not providing effective ventilation, there are a few things you can do. Ensure that the vents and air ducts are clear of any obstructions or debris. Clean or replace the ventilation ducts if necessary. You can also consider installing additional ventilation ducts to improve airflow. Proper installation and positioning of the fan can also contribute to better ventilation efficiency.

Unblocking Air Vents

If your cooker extractor fan seems clogged or if there is reduced airflow, it may indicate blocked air vents. Start by removing any visible debris or dust from the vents. For stubborn blockages, you can use a small brush or a vacuum cleaner with a hose attachment to clear the vents. Regularly cleaning the vents will help improve ventilation efficiency and prevent future blockages.

Cleaning Grease Filters

Regularly cleaning the grease filters of your cooker extractor fan is essential to maintain its functionality and performance. Start by removing the filters from the fan assembly. Soak the filters in warm soapy water for a few minutes to loosen any grease or residue. Gently scrub the filters using a brush or sponge to remove the build-up. Rinse the filters thoroughly and allow them to dry completely before reinstalling.

Adjusting or Securing Mounting

If your cooker extractor fan is vibrating or producing excessive noise, it may indicate an issue with the fan’s mounting. Check that all screws and brackets are tightened and secure. If any components are worn out or damaged, replace them as necessary. Properly adjusting the mounting can help alleviate vibrations and ensure stable operation.

Tools and Equipment Needed

If you decide to perform DIY troubleshooting and repairs on your cooker extractor fan, you will likely need the following tools and equipment:

  • Screwdriver Set: A set of screwdrivers with various types and sizes will be necessary for removing screws and accessing different parts of the fan.
  • Multimeter: A multimeter is a versatile tool used to measure electrical parameters, such as voltage, current, and resistance. It can be helpful for diagnosing electrical issues.
  • Replacement Motor: In case motor replacement is required, make sure to purchase an appropriate replacement motor compatible with your cooker extractor fan model.
  • Fan Blade: If you need to replace damaged fan blades, you will need to purchase a compatible replacement set.
  • Electrical Tape: Electrical tape is useful for insulating and securing electrical connections.
  • Wire Strippers: Wire strippers are essential for removing insulation from wires during repairs or replacements.
  • Control Panel Replacement: If the fan’s control panel needs to be replaced, ensure you have the correct replacement panel.
  • Soundproofing Materials: If excessive noise is an issue, you may consider using soundproofing materials, such as foam inserts or acoustic dampers, to reduce noise levels.
  • Ventilation Ducts: If improving ventilation efficiency is necessary, you may need to purchase additional ventilation ducts for installation.
  • Grease Filter: It is advisable to have spare grease filters for regular replacement and maintenance.

Safety Precautions

When working with electrical appliances like cooker extractor fans, it is important to take appropriate safety precautions. Here are some safety measures to keep in mind:

Turn Off Power Supply

Before performing any repairs or inspections, ensure that the power supply to the cooker extractor fan is turned off. This will help prevent electrical accidents or shocks.

Wear Protective Gear

To protect yourself while working, wear appropriate protective gear, such as safety glasses and gloves. This will help prevent injuries from sharp edges or accidental contact with electrical components.

Disconnect from Gas Source

If your cooker extractor fan is connected to a gas supply, make sure to disconnect it before starting any repair work. Gas leaks can be hazardous, and it is best to avoid any potential risks.

Beware of Moving Parts

When inspecting or repairing the fan, be cautious of moving parts, such as fan blades or motor components. Avoid placing your hands near these parts to prevent injuries.

Work in a Well-Ventilated Area

To ensure your safety during repairs, work in a well-ventilated area. Proper ventilation will help dissipate any fumes or odors that may be present.

Avoid Water Contact

Since you will be working with electrical appliances, it is important to avoid contact with water or other liquids. Water can cause electrical shorts and pose a safety hazard.

When to Call a Professional

While some cooker extractor fan issues can be addressed through DIY troubleshooting and repair, there are certain situations where it is best to seek professional assistance. Consider calling a professional when facing the following situations:

Complex Electrical Issues

If you are not confident in dealing with complex electrical issues or troubleshooting electrical components, it is advisable to call a professional electrician or appliance repair technician. They have the expertise and tools to handle intricate electrical problems.

Gas-Powered Extractor Fans

If your cooker extractor fan is connected to a gas supply or requires gas-related maintenance, it is crucial to hire a professional who is certified to work with gas appliances. Gas-related repairs should only be performed by qualified technicians to ensure safety.

Structural Modifications Required

If the repair or installation of your cooker extractor fan involves significant structural modifications, such as cutting into walls or modifying vent ducts, it is best to consult a professional. They will have the knowledge and experience to handle structural changes effectively.

Warranty and Manufacturer Support

If your cooker extractor fan is still under warranty or if you have manufacturer support, it is recommended to contact the manufacturer or authorized service center. They can guide you through the repair process and provide expert assistance.

Lack of Technical Expertise

If you lack technical expertise or experience in handling electrical appliances, it is always better to err on the side of caution and call a professional. They will ensure that the repair work is carried out safely and efficiently.

Choosing a Professional Repair Service

When choosing a professional repair service for your cooker extractor fan, consider the following factors:

Experience and Expertise

Look for a repair service that has years of experience in repairing cooker extractor fans. Consider their expertise in handling specific brands or models, as it can significantly impact the quality of the repair work.

Certifications and Licenses

Ensure that the repair service has proper certifications and licenses. This guarantees that they meet the industry standards and have the necessary knowledge and skills to handle your cooker extractor fan.

Customer Reviews and Recommendations

Read customer reviews and seek recommendations from friends, family, or online forums. Positive feedback from satisfied customers indicates a reputable and reliable repair service.

Availability and Response Time

Consider the availability and response time of the repair service. A prompt response and quick turnaround time can ensure that your cooker extractor fan is repaired efficiently and without unnecessary delays.

Warranty on Repairs

Inquire about the warranty on repairs offered by the professional service. A warranty provides peace of mind and serves as an assurance that the repair work is of high quality.


Compare the pricing and affordability of different repair services. While cost should not be the sole factor in decision-making, it is important to find a balance between quality service and reasonable pricing.

Preventing Future Problems

To avoid future issues with your cooker extractor fan, follow these preventive measures:

Regular Cleaning and Maintenance

Regularly clean and maintain your cooker extractor fan to prevent debris build-up and ensure optimal performance. Clean the fan blades, vents, and filters according to the manufacturer’s recommendations.

Replacing Filters Periodically

Replace grease filters periodically to maintain proper airflow and prevent grease build-up. Refer to the manufacturer’s guidelines for filter replacement intervals.

Avoiding Excessive Grease Build-up

Take steps to minimize excessive grease build-up by using appropriate cooking techniques and keeping the fan clean. Avoid frying or cooking foods with excessive grease close to the fan.

Proper Installation and Mounting

During installation, carefully follow the manufacturer’s instructions to ensure proper installation and mounting. Improper installation can lead to performance issues and increased wear and tear.

Following Manufacturer’s Instructions

Always read and follow the manufacturer’s instructions for operating and maintaining your cooker extractor fan. Adhering to the guidelines provided will help extend the lifespan of your appliance.

Addressing Issues Promptly

If you notice any issues or irregularities with your cooker extractor fan, address them promptly. Prompt attention and timely repairs can prevent minor issues from developing into more significant problems.


Cooker extractor fans are essential for maintaining clean air and a pleasant environment in your kitchen. However, they can occasionally encounter issues such as motor failure, fan blade damage, electrical wiring problems, or excessive noise. By following the DIY troubleshooting and repair tips provided in this article, you may be able to resolve certain common issues. Remember to prioritize safety, and when in doubt, seek professional assistance. By choosing a reputable repair service, following preventive measures, and addressing issues promptly, you can maintain a well-functioning cooker extractor fan in your kitchen for years to come.

Call us now!