plumbing london

Fan Coil Unit Condenser Coil Cleaning London

In the bustling city of London, where the demands of industries and buildings are ever-growing, ensuring the efficiency and longevity of fan coil units is of paramount importance. One crucial aspect o...

In the bustling city of London, where the demands of industries and buildings are ever-growing, ensuring the efficiency and longevity of fan coil units is of paramount importance. One crucial aspect of this maintenance process is the regular cleaning of condenser coils. These coils, essential in removing heat from the system, can accumulate dust, dirt, and debris over time, leading to reduced performance and increased energy consumption. With our expert cleaning services specifically tailored for fan coil units in London, you can trust us to keep your systems running smoothly, promoting optimal energy efficiency and preserving their lifespan.

Why is condenser coil cleaning important?

Condenser coil cleaning is of utmost importance for several reasons. Firstly, it ensures efficient heat transfer, which is crucial for the optimal functioning of your cooling or heating system. When the condenser coils are clean, heat exchange occurs more effectively, resulting in improved energy efficiency and reduced energy consumption.

Secondly, cleaning the condenser coils helps to improve indoor air quality. Over time, dirt, dust, and other particles can accumulate on the coils, creating a breeding ground for bacteria, mold, and allergens. These pollutants can then be circulated throughout your home or workplace, posing a risk to occupants and potentially causing or aggravating respiratory problems.

Another significant benefit of condenser coil cleaning is the prevention of breakdowns. When coils become clogged with dirt and debris, it hampers the system’s ability to cool or heat effectively. This can lead to increased strain on components, including the compressor, which may eventually result in mechanical failure. Regular cleaning can help avoid costly repairs or the need for premature replacement of the entire unit.

Lastly, cleaning your condenser coils regularly can extend the lifespan of the unit. By maintaining clean coils, you reduce the workload on the system, preventing unnecessary wear and tear and increasing its overall longevity.

Signs that your condenser coil needs cleaning

It is important to be aware of the signs indicating that your condenser coil requires cleaning. One obvious indicator is reduced cooling or heating capacity. If you notice that your system is taking longer to reach your desired temperature or is struggling to maintain it, dirty condenser coils could be the culprit.

Increased energy bills can also be a sign that your condenser coils need attention. Clogged coils force your unit to work harder to achieve the same level of cooling or heating, resulting in higher energy consumption and subsequently, higher utility bills.

Poor air circulation is another red flag. If you notice weak or uneven airflow, it could be due to dirty condenser coils obstructing the movement of air through the system. This can lead to hot or cold spots in your space and overall discomfort.

Excessive noise coming from the unit can also indicate the need for condenser coil cleaning. When coils are dirty, the system has to work harder, which can result in increased noise levels. If you notice unusual or louder than usual noises, it may be time to clean your condenser coils.

Preparation for condenser coil cleaning

Before proceeding with condenser coil cleaning, it is important to take a few preparatory steps to ensure safety and efficiency.

The first step is switching off the power to the unit. This can typically be done by turning off the circuit breaker that supplies electricity to the system. This precautionary measure prevents any accidents or electrical shocks during the cleaning process.

Next, it is essential to remove any debris around the condenser unit. This includes leaves, twigs, grass clippings, and other loose particles that may have accumulated around the coil. Removing this debris ensures that the cleaning process can be carried out effectively and without obstruction.

Lastly, ensuring safety precautions is vital. Make sure you wear appropriate personal protective equipment, such as gloves and safety glasses, to protect yourself from any potential hazards during the cleaning process. Additionally, be cautious of sharp edges or protruding parts on the unit.

Methods for cleaning condenser coils

There are several methods available for cleaning condenser coils, each with its own advantages and suitability for different situations. The choice of method depends on factors such as the severity of dirt buildup, accessibility of the coils, and the resources available for cleaning.

Chemical cleaning is a widely used method that involves the use of specific cleaning solutions to dissolve and remove dirt and debris from the condenser coils. This method is effective for heavily soiled coils and is often used by professionals for thorough cleaning.

Pressure washing is another popular technique for cleaning condenser coils. It involves using a pressure washer to forcefully spray water onto the coils, dislodging and washing away the accumulated dirt. This method is suitable for moderate levels of dirt buildup and is relatively quick and efficient.

Brush cleaning is a more manual approach that involves using a brush to scrub the coils and dislodge dirt and debris. This method is often used for light to moderate dirt accumulation and requires more time and effort compared to chemical cleaning or pressure washing.

In some cases, a combination of methods may be used for comprehensive cleaning. This can involve using chemical cleaners to dissolve stubborn dirt, followed by pressure washing or brush cleaning to flush out and remove the loosened particles.

Procedure for chemical cleaning

Chemical cleaning is a systematic process that requires careful attention to detail to ensure optimal results. The following procedure outlines the steps involved in chemical cleaning of condenser coils.

  1. Choosing appropriate cleaning products: Select a suitable cleaning solution that is specifically designed for condenser coil cleaning. Ensure that the product is safe to use on the type of coils in your unit and follow the manufacturer’s instructions for dilution and application.
  2. Removing the top panel: Start by removing the top panel of the condenser unit. This provides access to the coils and allows for thorough cleaning.
  3. Spraying the coil with the cleaning solution: Use a sprayer or spray bottle to apply the cleaning solution onto the coils. Make sure to cover the entire surface evenly, ensuring that the solution reaches all areas with dirt buildup.
  4. Allowing the solution to sit: Allow the cleaning solution to sit on the coils for the recommended amount of time. This allows the solution to penetrate and dissolve the dirt, making it easier to rinse off.
  5. Rinsing off the coil: After the solution has had time to work, thoroughly rinse off the coils with water. Use a hose or sprayer to remove all traces of the cleaning solution and loosened dirt.
  6. Replacing the top panel: Once the coils are clean and rinsed, replace the top panel of the condenser unit. Ensure that it is securely fastened and properly aligned.

Procedure for pressure washing

Pressure washing is a straightforward and effective method for cleaning condenser coils. The following steps outline the procedure for pressure washing:

  1. Preparing the pressure washer: Ensure that the pressure washer is in proper working condition and filled with water if required. Adjust the pressure settings according to the manufacturer’s guidelines to avoid damaging the coils.
  2. Positioning the unit: Move the pressure washer to a suitable location near the condenser unit. Position it in a way that allows for easy and safe access to the coils.
  3. Adjusting the pressure and nozzle: Adjust the pressure and nozzle settings on the pressure washer. Start with a lower pressure setting and a wide-angle or fan-shaped nozzle. Gradually increase the pressure if necessary, taking care not to exceed the recommended level.
  4. Spraying the coil: Direct the spray of water onto the coils, ensuring that you cover the entire surface evenly. Move in a systematic manner, starting from the top and working your way down.
  5. Allowing the coil to dry: After the pressure washing is complete, allow the coils to dry completely before replacing the top panel. This can be done by leaving the unit exposed to air circulation for a sufficient amount of time.

Procedure for brush cleaning

Brush cleaning is a manual method that requires attention to detail. The following procedure outlines the steps involved in brush cleaning of condenser coils:

  1. Gathering the necessary tools: Prepare the tools required for brush cleaning, including a stiff-bristled brush, a vacuum cleaner, and a spray bottle filled with water or a mild cleaning solution.
  2. Removing the top panel: Start by removing the top panel of the condenser unit, providing access to the coils.
  3. Using a brush to scrub the coil: Gently scrub the coils using the stiff-bristled brush. Work in small circular motions, paying particular attention to areas with visible dirt or debris.
  4. Vacuuming away the loosened debris: Use a vacuum cleaner with a brush attachment to carefully remove the loosened dirt and debris. Make sure to cover the entire coil surface and pay extra attention to hard-to-reach areas.
  5. Replacing the top panel: Once the coils are clean and free of debris, replace the top panel of the condenser unit, ensuring a secure fit.

Frequency of condenser coil cleaning

The frequency of condenser coil cleaning depends on several factors, including manufacturer recommendations, usage and environmental factors, and adherence to a regular inspection and maintenance schedule.

Manufacturers typically provide guidelines regarding the recommended frequency of coil cleaning. This can vary depending on the specific unit and its intended use. It is important to follow these recommendations to ensure optimal performance and avoid any warranty-related issues.

Usage and environmental factors also play a role in determining the frequency of coil cleaning. For example, units that are located in areas with high pollen or dust levels may require more frequent cleaning. Similarly, systems that are used extensively or operate in harsh environments may accumulate dirt and debris more quickly.

Regular inspection and maintenance schedules can greatly assist in determining when condenser coils need cleaning. By conducting routine checks and assessments, you can identify any signs of dirt accumulation or decreased performance and take appropriate action promptly.

Benefits of professional condenser coil cleaning

While some individuals may choose to clean their condenser coils themselves, there are several benefits to entrusting the task to professionals with expertise in this area.

One major advantage of professional condenser coil cleaning is the expertise and experience that technicians bring to the job. They have a thorough understanding of different coil types, cleaning methods, and safety precautions, ensuring optimal results without any risks of damage to the unit.

Another benefit is the use of specialized equipment. Professionals have access to high-quality cleaning products, tools, and machinery that are specifically designed for the task. This enables them to clean coils more efficiently and effectively, achieving a comprehensive clean that may be challenging to recreate without professional-grade equipment.

Hiring professionals for coil cleaning saves you time and effort. Cleaning condenser coils can be a time-consuming and labor-intensive task, especially if you are unfamiliar with the process. By outsourcing the job, you can free up your time and energy for other important tasks or activities.

Lastly, professional condenser coil cleaning provides a more comprehensive cleaning compared to DIY methods. Technicians have the knowledge and skills to identify potential issues or damage, which may require additional attention or repairs. They can also address any underlying issues that may be contributing to dirty coils, ensuring optimal performance and longevity of your unit.


In conclusion, condenser coil cleaning is a vital maintenance task that offers numerous benefits for your cooling or heating system. By ensuring efficient heat transfer, improving indoor air quality, preventing breakdowns, and extending the lifespan of the unit, regular cleaning of condenser coils is a crucial step in maintaining optimal performance and energy efficiency.

Understanding the signs that indicate the need for coil cleaning, such as reduced cooling capacity, increased energy bills, poor air circulation, and excessive noise, allows you to take prompt action and prevent more significant issues.

By following the appropriate procedures for chemical cleaning, pressure washing, or brush cleaning, you can effectively remove dirt and debris from the coils, restoring their functionality and prolonging the life of your unit.

Conducting condenser coil cleaning according to manufacturer recommendations, considering usage and environmental factors, and adhering to regular inspection and maintenance schedules ensures that your coils remain clean and your system operates optimally.

While DIY cleaning is an option, professional condenser coil cleaning offers expertise, specialized equipment, time-saving, and comprehensive results that make it an attractive choice. By entrusting this task to professionals, you can ensure that your coils are thoroughly cleaned and that any underlying issues are addressed, promoting the long-term performance and efficiency of your cooling or heating system.

Call us now!