plumbing london

how to unblock a bath with water in it

If you find yourself with a blocked bath full of water, don't worry - there are simple steps you can take to solve the issue.

Dealing with a blocked bath can be a frustrating experience, especially when there is still water in it. However, with the right approach and a bit of patience, you can easily tackle the issue and enjoy a relaxing bath once again. In this article, we will discuss how to unblock a bath with water in it using simple methods that anyone can try at home.

Step 1: Assess the Water Level and Blockage

The first step in unblocking a bath with water in it is to assess the water level and the blockage. If the water is draining slowly or not draining at all, it is likely that there is a blockage somewhere in the pipes. Start by checking the water level in the bath and see if it is rising or staying stagnant. This will give you an idea of the severity of the blockage and help you determine the best course of action.

Once you have assessed the water level, try to locate the blockage. It could be a buildup of hair, soap scum, or other debris that is preventing the water from draining properly. Check the drain cover and remove any visible debris that may be causing the blockage. If the blockage is further down the pipes, you may need to use a plunger or a drain snake to clear it out.

Step 2: Try Simple Methods to Unblock the Bath

After assessing the water level and blockage, it’s time to try some simple methods to unblock the bath. One effective method is to pour boiling water down the drain. The heat can help loosen up any debris causing the blockage and allow the water to flow freely. Another method is to use a mixture of baking soda and vinegar. Pour a cup of baking soda followed by a cup of vinegar down the drain, cover it with a cloth, and let it sit for about 30 minutes. Then, flush the drain with hot water to see if the blockage has cleared.

If these methods do not work, you may need to use a plunger or a drain snake to remove the blockage. For a plunger, make sure there is enough water in the bath to cover the rubber end and create a seal. Plunge up and down vigorously to try and dislodge the blockage. If using a drain snake, carefully insert it into the drain and twist it to grab onto the blockage and pull it out.

With the right approach and a bit of effort, you can easily unblock a bath with water in it and get back to enjoying a relaxing soak. By following the simple steps outlined in this article, you can effectively tackle the blockage and prevent it from happening again in the future. Remember to regularly clean your drains to prevent buildup and maintain proper drainage in your bath.

Call us now!