How to Remove Airlock From Sealed and Gravity Fed System It is important to not take an airlock in your gravity fed sealed
CP16 Tightest Testing & Purging
We’re open 24/7/365 for CP16 Gas Certificates
Pipe sizing, testing and purging calculations
CP16 GAS SAFETY CERTIFICATES.
We cover London, Surrey, Berkshire, Hampshire, Buckinghamshire, Kent, Essex and surrounding counties.
CP16 Gas Safety Certificate
Commercial Gas Testing and Purging allows gas engineers to issue report to their client on the safety of new and existing gas installation, when carrying out strength testing, tightness testing and/or purging in accordance with IGE/UP/1 (Edition 2) and/or IGE/UP/1A (Edition 2) in a non-domestic environment
Commercial Gas Safety Certificates
CP16 Gas Certificate – Gas Testing and Purging
DISCOUNTS PROVIDED FOR BULK SITES.
Commercial Gas Safe Registration 582607
Legal Requirement and must be carried out every 12 months.
Commercial cp16 Gas Safety Certificate
Inspections and tests are performed on gas equipment and gas pipelines include furnace, fires, gas meters, burner, boilers, forced draught burners, industrial flues and chimneys to make sure they are safe, secure and sound enough for commercial premises. If the appliance uses an exhaust system to remove flue gases, they will also be inspected to see if the exhaust method is appropriate and if the required ventilation is provided or sufficient.
You will receive a CP16 Commercial gas certificate from our commercial gas engineer on completion, which will record the results of gas equipment installed on your premises.
The CP16 commercial gas safety check can be carried out between the 11th and 12th months from the date of the previous gas certificate (if the property has been permanently rented out). Therefore, it is important to indicate the date of the previous gas test so that we can carry out a new gas test at a sufficient time before the previous one ends
If you are in need of a Commercial Gas Safety Check, simply call our 24 hour Customer service
Book Your CP16 GAS SAFETY CERTIFICATE Today
0208 935 5572
What Our Client Says
Gas Safety Certificate Law
Any Business or commercial property where a commercial gas meter or a commercial gas appliance is installed, is required by law to have a valid commercial gas safety certificate either a CP15 commercial gas installation certificate or CP17 non domestic annual servicing report or A CP42 commercial catering gas certificate or all of the above. Failure to comply with these terms could invalidate your building insurance and you will also be breaking the law. Regulation (36)(1) of the Gas Safety (Installation & Use) Regulations 1998. It is a legal requirement by the law.
Who can Issue a Commercial Gas Certificate
Only registered commercial gas safe engineers can issue a commercial gas safety certificate. The Commercial engineer will carry out an inspection on your commercial gas appliances installed in the building.
How long is a Commercial Gas Certificate Valid For
You must keep your gas certificate for two years according to regulation 36(3)(c) of the Gas Safety (Installation and Use) Regulations 1998. This is a legal requirement and we also have to keep our records for 2 years. So if you loose your records for any reason and need it, we will always have a copy on file.
What are the fines / Consequences for Braking the law
The standard penalty is £6000 for each gas appliance installed in your property and/or a minimum of 6 months imprisonment for non compliance.
Gas Safety Resources and help
The Gas Safety (Installation and Use) Regulations 1998
Official Health and Safety Gas Safe Information
Official Gas Safe Register
Carbon monoxide informati
If you are in need of a CP15 Gas Safety, simply call our 24 hour Customer service
Book Your COMMERCIAL CP16 GAS SAFETY certificate Today
0208 935 5572